Display not working
Most Likely Causes
Touchpad
Most common causeappliancepartsprosConfirm that the display on the dishwasher is functioning properly. If the display is working, but you find that some of the buttons do not respond correctly and the wiring/ribbon connector are secure, then you will need to replace the touchpad and control panel.
Repair Steps
- 1.Disconnect power at circuit breaker. Turn off power to dishwasher.
- 2.Remove control panel trim. Find securing screws or clips around edges of panel.
- 3.Disconnect touchpad wires. Note positions of wires to reconnect properly later.
- 4.Remove touchpad mounting screws. A few small screws attach touchpad within panel.
- 5.Detach old touchpad from control panel. Gently lift out once screws are removed.
- 6.Clean mounting area inside control panel. Wipe away debris from where new touchpad mounts.