Lights flashing or blinking
Most Likely Causes
Heating Element
Most common causeappliancepartsprosThe heating element heats the water to the right temperature. If the water doesn't get hot enough after some time, a light on the panel may blink. To check if the heating element is burned out, use a multimeter to test if for continuity. If it does not have continuity, the element needs to be replaced.
Repair Steps
- 1.Disconnect power to dishwasher at the circuit breaker. Shut off for safety before servicing.
- 2.Remove lower access panels and drain water from dishwasher tub. Be prepared to collect water.
- 3.Note wire positions connecting to existing element terminals. Take clear photos for reference.
- 4.Disconnect wires from element terminals one at a time. Carefully remove without damage.
- 5.Remove any screws or clips securing element in tub. Lift out once fully disconnected.
- 6.Clean area within tub where new element will mount. Remove debris from mounting surface.