Gas stove burner won't light
Most Likely Causes
Range/Stove/Spark Ignition Switch
Most common causeappliancepartsprosWhen you turn on the burner, a part called the spark ignition switch sends power to the spark module, which makes a spark. If this switch is broken, it won't send power to the spark module, and the burner won't make a spark. If your stove's burner isn't sparking, check if the other burners are sparking right. If they are, then the spark ignition switch is likely broken.
Repair Steps
- 1.Shut off power to the range at the main circuit breaker for safety.
- 2.Remove any control knobs, bezels, or panels covering the front surface area.
- 3.Locate the ignition switch mounted under the control knob cluster or gas valve.
- 4.Disconnect the wire harness by pressing locking tabs and pulling the connector.
- 5.Remove mounting screws or retaining clips holding the switch in position.
- 6.Remove the old ignition switch by gently wriggling it free from the mounting portal.