Temperature not right
Most Likely Causes
Range/Stove/Control Board
Most common causeappliancepartsprosThe control board in an oven typically sends electricity to the bake and broil elements or the igniters to heat the oven to the set temperature. When the temperature sensor detects the right heat, the control board should cut off the electricity to the heating part. If the control board is broken, it might cut off the electricity too early or not at all, causing the oven temperature to be off. Before you think about replacing the control board, you should test the temperature sensor and other parts. If those parts are working fine, you can check the board for any damage or a part that's shorted out. You can also use a multimeter to test if electricity is getting to the bake or broil elements or igniters, after you've looked at the wiring diagram for the appliance.
Repair Steps
- 1.Shut off power to the range by locating the circuit breaker and shutting it off. This prevents electric shock.
- 2.Remove the control knobs by gently pulling straight up and off of the stems they attach to. Set aside.
- 3.Remove the control panel of the oven by locating mounting screws around the edges and carefully removing them.
- 4.Disconnect the wire connectors attached to the control board by squeezing release tabs and gently pulling wires free.