Overflowing
Most Likely Causes
Washing Machine Water Inlet Valve
Most common causeappliancepartsprosIf the washer continues to fill when the washer is turned off or is unplugged then you will need to replace the water valve.
Repair Steps
- 1.Shut off water supply. Turn off the valves where the water lines attach to the washing machine. This prevents flooding during repairs.
- 2.Release water pressure. Run the wash cycle to drain any remaining water trapped in the lines before proceeding.
- 3.Disconnect hoses. Detach the hot and cold water hoses from the valve itself using pliers if necessary.
- 4.Remove mounting hardware. Use a screwdriver to take out any screws or bolts attaching the inlet valve to the machine.
- 5.Extract old valve. Ease the inlet valve out of position once it is fully detached from mountings and water lines.
- 6.Inspect seal rings. If the rubber seal rings inside the valve port are cracked or deteriorated, replace them now.