Will not start
Most Likely Causes
Washing Machine User Control and Display Board
Most common causeappliancepartsprosTo check if the user control and display board is working correctly, start by pressing the buttons on the control panel. If you notice that some buttons respond while others don't, it could be a sign that the control and display board needs replacement. If you find that the display isn't showing anything, verify if the user control and display board is receiving power. If it's getting power but still isn't functioning as it should you will need to replace the display board.
Repair Steps
- 1.Unplug machine. Disconnect power to the washing machine before accessing internal components.
- 2.Open console panel. Locate and remove the screws securing the console/control panel on the top or front of the machine.
- 3.Disconnect ribbon cables. Unplug any flat flex ribbon cables connecting the old control board to other circuit boards or parts.
- 4.Remove mounting screws. Unfasten the screws or clips anchoring the existing control board in the panel frame.
- 5.Remove old board. Pull the board assembly out from its seating once fully disconnected from cables and power.